Skip to main content

Heat-resistant conveyor belts pay attention during maintenance


The heat-resistant conveyor belt should be well maintained during use, so as to ensure its working efficiency and service life. The general maintenance measures are relatively familiar to the users who use the conveyor belt. The conveyor belt manufacturers in this chapter mainly bring everyone to understand the heat-resistant transportation. Take care of places that require special attention during maintenance.
     1. During use and storage, the conveyor belt should be kept clean and protected from direct sunlight or rain and snow to prevent contact with acids, alkalis, oils, organic solvents, etc., and one meter away from the heating device.
     2. The conveyor belt should be stored in an environment where the temperature is between 18-40 ° C and the humidity is between 50-80%. It must be placed in rolls, not folded (meaning: part of the object is folded), and should be flipped once every season.
     3. When used, different types and specifications of heat-resistant conveyor belts should not be used together, and the joints should be glued.
     4, pay attention to adjust the running speed during operation, the running speed is generally not more than 2.5 m / s, block size, wear (a basic type of component failure) large materials and the use of fixed unloading device as much as possible Low speed mode. The conveyor belt manufacturer is the main component of the rafting and carrying materials. When selecting, it adopts cotton canvas, polyester canvas or nylon canvas belt according to the tension. The other parts of the conveyor are designed to meet various belt strength requirements. The conveyor belt connection can be mechanical joints, cold glue joints and vulcanized joints according to different working conditions.
     5. The matching of the drive roller and the reversing roller and the requirement of the groove angle of the roller (supporting conveyor belt and material weight) should be scientifically selected according to the design regulations of the heat-resistant conveyor belt. The heat-resistant conveyor belt is made of multi-layer rubber cotton canvas (polyester cotton cloth) or polyester canvas with high temperature resistant or heat-resistant rubber. It is bonded together by high temperature vulcanization. It is suitable for conveying hot coke, cement, slag and below 175 °C. Hot castings, etc.

Article source reference： https://www.sjbelt.com/product/conveyor-belt/heat-resistant-conveyor-belt.html
Labels:

Comments

Post a Comment

Popular posts from this blog

How to avoid the damage of the rubber surface of the nylon belt

Nylon conveyor belts will suffer from rubber surface damage during use. When the rubber surface is damaged, the  Nylon conveyor belt  will not be used normally, and the overall service life of the conveyor belt will be shortened. So how to avoid the damage of the nylon conveyor belt rubber surface during use? Below the conveyor belt manufacturers take everyone to understand in detail to avoid the nylon conveyor belt rubber surface damage skills. 1, to prevent the conveyor belt from suffering a big impact The design of the leakage system of the transportation system is too large, the coal flow direction is unreasonable, and the system has many large materials, which can cause the conveyor belt to be impacted, forming more pits on the belt surface and damaging the rubber surface. 2, to prevent contact with high temperature materials When the  rough top conveyor belt  transports the dirty slag coal in the boiler room, the unheated high temperature dirty slag co...
Post a Comment
Read more

Common conveying materials and their characteristics

There are also certain differences in the materials of different types of conveyor belts. Some conveyor belts can be distinguished from the name, such as nylon conveyor belts, rubber conveyor belts, and the like. However, many conveyor belts can only be classified by name, and it is indistinguishable from which material is used. Rubber material Rubber conveyor belt has the characteristics of heat resistance, high temperature resistance, burning resistance, acid and alkali resistance, cold resistance, abrasion resistance, oil resistance, flame retardancy, tear resistance and puncture resistance. It is suitable for working environment temperature from low temperature -15 °C to high temperature 40 °C. The material temperature does not exceed 50 °C. According to different quality standards, it can be divided into ordinary conveyor belt, three-resistant conveyor belt,  chevron conveyor belt , etc. Rubber belt conveyor is mainly used for solid material transportation in mining, met...
Post a Comment
Read more